Aluminum 6061-T6 Datasheet
Aluminum is remarkable for the metal’s low density and its ability to resist corrosion due to the phenomenon of passivation.
*Always consult your Heat Treater*
*Information Provided is General*
6061-T6 is the most versatile of the heat treatable aluminum alloys. It has most of the good qualities of aluminum and it offers a wide range of mechanical properties and corrosion resistance. It can be fabricated by many of the commonly used techniques.
In the annealed condition it has good formability. The T6 properties may be obtained by artificial aging. It may be welded by all methods and may be furnace brazed.
This material is used for a wide range of products and applications from truck bodies / frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
Machinability for automatic screw machines, 6061 is rated between 70% – 80% of aluminum 2011 in the T4 / T6 conditions, and 50% in the O condition.
Aluminum 6061-T6 Typical Analysis
|Cu||Si||Fe max||Mn||Mg||Zn max||Cr||Ti max|
Typical Mechanical Properties
|Tensile Strength (psi)||Yield Strength (psi)||Elongation 1/16” Flat||% in 2 ½” diameter||Min 90 Cold Bend Radius for .64” thick||Brinell Hardness|
Extruded Aluminum 6061-T6 Tolerances for Rounds, Squares, & Rectangles
|Dimensions (inches)||Tolerance (in inches)||Dimensions (inches)||Tolerance (in inches)|
|Under 0.125”||+/- 0.006||1.000 to under 1.500||+/- 0.012|
|0.125 to under 0.250||+/- 0.007||1.500 to under 2.000||+/- 0.014|
|0.250 to under 0.500||+/- 0.008||2.000 to under 4.000||+/- 0.024|
|0.500 to under 0.750||+/- 0.009||4.000 to under 6.000||+/- 0.034|
|0.750 to under 1.000||+/- 0.010||6.000 to under 8.000||+/- 0.044|
|8.000 to under 10.000||+/- 0.054|